
ACT XACT Streetlite Flywheel for 00-09 Honda S2000
- Improved engine response and acceleration
- Heat-treated forging for strength and toughness
- Induction-hardened ring gears for maximum lifespan
- One-piece construction for efficient heat transfer
- Suitable for street and race use
- Forged, CNC machined, and dynamically computer balanced
- Description
- Vehicle Fitment
- Technical Data
- Included
- Install Guide
-
The ACT XACT Streetlite flywheel is one of the most impactful bolt-on upgrades you can make to a Honda S2000. The OEM flywheel tips the scales at roughly 20 lbs - the Streetlite comes in at just 11.2 lbs. That 8.8-lb reduction in rotational mass is felt immediately: your F20C or F22C spins up faster, throttle response sharpens, and rev recovery between shifts gets noticeably quicker. On an AP1 pushing toward the 9,000 RPM redline, or an AP2 working the F22C through a canyon, that kind of flywheel response translates directly into a more engaging, connected driving experience.
ACT built the XACT Streetlite as a true one-piece unit from forged chromoly steel. It is CNC machined for dimensional accuracy and dynamically computer balanced for smooth operation at high RPM. The one-piece forged design handles heat better than multi-piece alternatives - it pulls thermal energy out of the friction surface efficiently, which matters on track days and back-to-back drag runs. It also eliminates the two most common failure points on budget flywheels: warped inserts and loose ring gears. The 109-tooth induction-hardened ring gear is built to handle repeated hard starts without wearing out or cracking under load.
This flywheel carries SFI 1.1 certification - independently tested and verified for both street and sanctioned drag racing use. If you run at an NHRA or similar event that requires SFI-certified drivetrain components, the Streetlite checks that box. If you just want a part that has been validated beyond the manufacturer's word alone, SFI 1.1 is your assurance.
Why Upgrade Your S2000 Flywheel?
The S2000's F20C and F22C engines are purpose-built high-revving powerplants, but the stock flywheel is a compromise designed for everyday drivability and cost. It carries more mass than a performance-focused build needs. A lightweight flywheel like the ACT Streetlite reduces the rotational inertia your engine fights against every time you get on the throttle. The result is faster revs on the way up, sharper response when you blip for a downshift, and quicker rev recovery after each gear change. For autocross - where momentum transitions happen in fractions of a second - or for any high-RPM track use past the VTEC crossover, the difference is real and measurable. This is not a marginal gain. It is a fundamental change to how the engine feels to drive. And unlike some race-focused parts, the Streetlite is streetable every day - no chatter, no idle roughness that rules it out for daily driving.
The XACT Streetlite fits all 2000-2009 Honda S2000 models - both the AP1 (F20C, 2.0L) and AP2 (F22C1, 2.2L) - and is backed by a 1-year warranty from date of retail purchase. Install with new OEM flywheel bolts (Honda P/N 90007-PNA-000 or grade 10.9 equivalent) torqued to 76 ft-lbs.
Fits: 2000-2009 Honda S2000 AP1 and AP2 | F20C (2.0L DOHC VTEC) and F22C1 (2.2L DOHC VTEC)
-
This flywheel fits all 2000-2009 Honda S2000 models, covering both the AP1 chassis (2000-2005, F20C 2.0L DOHC VTEC) and AP2 chassis (2006-2009, F22C1 2.2L DOHC VTEC).
- 2000 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2001 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2002 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2003 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2004 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2005 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2006 Honda S2000 AP2 - F22C1 2.2L DOHC VTEC
- 2007 Honda S2000 AP2 - F22C1 2.2L DOHC VTEC
- 2008 Honda S2000 AP2 - F22C1 2.2L DOHC VTEC
- 2009 Honda S2000 AP2 - F22C1 2.2L DOHC VTEC
Compatible with the stock clutch bellhousing on both AP1 and AP2 chassis. No modifications required for fitment.
Installation notes: Torque flywheel bolts to 76 ft-lbs. Always install with new OEM Honda flywheel bolts (Honda P/N 90007-PNA-000 or equivalent grade 10.9 hardware) - reuse of old flywheel bolts is not recommended. A clutch alignment tool is required if you are replacing the clutch at the same time; it is not included with this flywheel. Flywheel bolts are not included.
If you are upgrading the full drivetrain at the same time, pair this flywheel with a compatible ACT clutch kit for the AP1 or AP2 S2000 for a matched friction surface and pressure plate.
-
Part Number 600355 Brand ACT (Advanced Clutch Technology) Flywheel Series XACT Streetlite Flywheel Weight 11.2 lbs (5.1 kg) OEM Flywheel Weight (Approx.) ~20 lbs (~9.1 kg) Weight Reduction vs. OEM ~8.8 lbs (~4.0 kg) Material Forged Chromoly Steel Manufacturing Process Forged, CNC Machined, Dynamically Computer Balanced Construction Type One-Piece (no inserts) Ring Gear Tooth Count 109 Ring Gear Treatment Induction Hardened SFI Certification SFI 1.1 Intended Use Street and Drag Racing Vehicle Fitment 2000-2009 Honda S2000 (AP1 and AP2) Compatible Engines F20C (2.0L DOHC VTEC), F22C1 (2.2L DOHC VTEC) Flywheel Bolt Torque Spec 76 ft-lbs Required Hardware New OEM flywheel bolts (Honda P/N 90007-PNA-000 or grade 10.9 equivalent) - not included Warranty 1 Year from Retail Purchase Date -
- 1x ACT XACT Streetlite Flywheel (Part #600355)
Not included: Flywheel bolts. Always install with new OEM Honda flywheel bolts (Honda P/N 90007-PNA-000 or equivalent grade 10.9 hardware). Reuse of old flywheel bolts is not recommended. A clutch alignment tool is required if replacing the clutch simultaneously and is not included with this flywheel.
For a complete S2000 drivetrain upgrade, pair this flywheel with a compatible ACT clutch kit for the AP1 or AP2 S2000. Using a matched ACT pressure plate and friction disc with the Streetlite flywheel ensures optimal friction surface compatibility and consistent clamping force.
- Ensure the vehicle is securely lifted and the transmission is removed. Replace the old flywheel with the ACT XACT Streetlite Flywheel, ensuring proper alignment. Reassemble the transmission and lower the vehicle. Follow the manufacturer's torque specifications for all bolts.
More Images


ACT XACT Streetlite Flywheel for 00-09 Honda S2000
- Improved engine response and acceleration
- Heat-treated forging for strength and toughness
- Induction-hardened ring gears for maximum lifespan
- One-piece construction for efficient heat transfer
- Suitable for street and race use
- Forged, CNC machined, and dynamically computer balanced
- Description
- Vehicle Fitment
- Technical Data
- Included
- Install Guide
-
The ACT XACT Streetlite flywheel is one of the most impactful bolt-on upgrades you can make to a Honda S2000. The OEM flywheel tips the scales at roughly 20 lbs - the Streetlite comes in at just 11.2 lbs. That 8.8-lb reduction in rotational mass is felt immediately: your F20C or F22C spins up faster, throttle response sharpens, and rev recovery between shifts gets noticeably quicker. On an AP1 pushing toward the 9,000 RPM redline, or an AP2 working the F22C through a canyon, that kind of flywheel response translates directly into a more engaging, connected driving experience.
ACT built the XACT Streetlite as a true one-piece unit from forged chromoly steel. It is CNC machined for dimensional accuracy and dynamically computer balanced for smooth operation at high RPM. The one-piece forged design handles heat better than multi-piece alternatives - it pulls thermal energy out of the friction surface efficiently, which matters on track days and back-to-back drag runs. It also eliminates the two most common failure points on budget flywheels: warped inserts and loose ring gears. The 109-tooth induction-hardened ring gear is built to handle repeated hard starts without wearing out or cracking under load.
This flywheel carries SFI 1.1 certification - independently tested and verified for both street and sanctioned drag racing use. If you run at an NHRA or similar event that requires SFI-certified drivetrain components, the Streetlite checks that box. If you just want a part that has been validated beyond the manufacturer's word alone, SFI 1.1 is your assurance.
Why Upgrade Your S2000 Flywheel?
The S2000's F20C and F22C engines are purpose-built high-revving powerplants, but the stock flywheel is a compromise designed for everyday drivability and cost. It carries more mass than a performance-focused build needs. A lightweight flywheel like the ACT Streetlite reduces the rotational inertia your engine fights against every time you get on the throttle. The result is faster revs on the way up, sharper response when you blip for a downshift, and quicker rev recovery after each gear change. For autocross - where momentum transitions happen in fractions of a second - or for any high-RPM track use past the VTEC crossover, the difference is real and measurable. This is not a marginal gain. It is a fundamental change to how the engine feels to drive. And unlike some race-focused parts, the Streetlite is streetable every day - no chatter, no idle roughness that rules it out for daily driving.
The XACT Streetlite fits all 2000-2009 Honda S2000 models - both the AP1 (F20C, 2.0L) and AP2 (F22C1, 2.2L) - and is backed by a 1-year warranty from date of retail purchase. Install with new OEM flywheel bolts (Honda P/N 90007-PNA-000 or grade 10.9 equivalent) torqued to 76 ft-lbs.
Fits: 2000-2009 Honda S2000 AP1 and AP2 | F20C (2.0L DOHC VTEC) and F22C1 (2.2L DOHC VTEC)
-
This flywheel fits all 2000-2009 Honda S2000 models, covering both the AP1 chassis (2000-2005, F20C 2.0L DOHC VTEC) and AP2 chassis (2006-2009, F22C1 2.2L DOHC VTEC).
- 2000 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2001 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2002 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2003 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2004 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2005 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2006 Honda S2000 AP2 - F22C1 2.2L DOHC VTEC
- 2007 Honda S2000 AP2 - F22C1 2.2L DOHC VTEC
- 2008 Honda S2000 AP2 - F22C1 2.2L DOHC VTEC
- 2009 Honda S2000 AP2 - F22C1 2.2L DOHC VTEC
Compatible with the stock clutch bellhousing on both AP1 and AP2 chassis. No modifications required for fitment.
Installation notes: Torque flywheel bolts to 76 ft-lbs. Always install with new OEM Honda flywheel bolts (Honda P/N 90007-PNA-000 or equivalent grade 10.9 hardware) - reuse of old flywheel bolts is not recommended. A clutch alignment tool is required if you are replacing the clutch at the same time; it is not included with this flywheel. Flywheel bolts are not included.
If you are upgrading the full drivetrain at the same time, pair this flywheel with a compatible ACT clutch kit for the AP1 or AP2 S2000 for a matched friction surface and pressure plate.
-
Part Number 600355 Brand ACT (Advanced Clutch Technology) Flywheel Series XACT Streetlite Flywheel Weight 11.2 lbs (5.1 kg) OEM Flywheel Weight (Approx.) ~20 lbs (~9.1 kg) Weight Reduction vs. OEM ~8.8 lbs (~4.0 kg) Material Forged Chromoly Steel Manufacturing Process Forged, CNC Machined, Dynamically Computer Balanced Construction Type One-Piece (no inserts) Ring Gear Tooth Count 109 Ring Gear Treatment Induction Hardened SFI Certification SFI 1.1 Intended Use Street and Drag Racing Vehicle Fitment 2000-2009 Honda S2000 (AP1 and AP2) Compatible Engines F20C (2.0L DOHC VTEC), F22C1 (2.2L DOHC VTEC) Flywheel Bolt Torque Spec 76 ft-lbs Required Hardware New OEM flywheel bolts (Honda P/N 90007-PNA-000 or grade 10.9 equivalent) - not included Warranty 1 Year from Retail Purchase Date -
- 1x ACT XACT Streetlite Flywheel (Part #600355)
Not included: Flywheel bolts. Always install with new OEM Honda flywheel bolts (Honda P/N 90007-PNA-000 or equivalent grade 10.9 hardware). Reuse of old flywheel bolts is not recommended. A clutch alignment tool is required if replacing the clutch simultaneously and is not included with this flywheel.
For a complete S2000 drivetrain upgrade, pair this flywheel with a compatible ACT clutch kit for the AP1 or AP2 S2000. Using a matched ACT pressure plate and friction disc with the Streetlite flywheel ensures optimal friction surface compatibility and consistent clamping force.
- Ensure the vehicle is securely lifted and the transmission is removed. Replace the old flywheel with the ACT XACT Streetlite Flywheel, ensuring proper alignment. Reassemble the transmission and lower the vehicle. Follow the manufacturer's torque specifications for all bolts.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
- Improved engine response and acceleration
- Heat-treated forging for strength and toughness
- Induction-hardened ring gears for maximum lifespan
- One-piece construction for efficient heat transfer
- Suitable for street and race use
- Forged, CNC machined, and dynamically computer balanced
- Description
- Vehicle Fitment
- Technical Data
- Included
- Install Guide
-
The ACT XACT Streetlite flywheel is one of the most impactful bolt-on upgrades you can make to a Honda S2000. The OEM flywheel tips the scales at roughly 20 lbs - the Streetlite comes in at just 11.2 lbs. That 8.8-lb reduction in rotational mass is felt immediately: your F20C or F22C spins up faster, throttle response sharpens, and rev recovery between shifts gets noticeably quicker. On an AP1 pushing toward the 9,000 RPM redline, or an AP2 working the F22C through a canyon, that kind of flywheel response translates directly into a more engaging, connected driving experience.
ACT built the XACT Streetlite as a true one-piece unit from forged chromoly steel. It is CNC machined for dimensional accuracy and dynamically computer balanced for smooth operation at high RPM. The one-piece forged design handles heat better than multi-piece alternatives - it pulls thermal energy out of the friction surface efficiently, which matters on track days and back-to-back drag runs. It also eliminates the two most common failure points on budget flywheels: warped inserts and loose ring gears. The 109-tooth induction-hardened ring gear is built to handle repeated hard starts without wearing out or cracking under load.
This flywheel carries SFI 1.1 certification - independently tested and verified for both street and sanctioned drag racing use. If you run at an NHRA or similar event that requires SFI-certified drivetrain components, the Streetlite checks that box. If you just want a part that has been validated beyond the manufacturer's word alone, SFI 1.1 is your assurance.
Why Upgrade Your S2000 Flywheel?
The S2000's F20C and F22C engines are purpose-built high-revving powerplants, but the stock flywheel is a compromise designed for everyday drivability and cost. It carries more mass than a performance-focused build needs. A lightweight flywheel like the ACT Streetlite reduces the rotational inertia your engine fights against every time you get on the throttle. The result is faster revs on the way up, sharper response when you blip for a downshift, and quicker rev recovery after each gear change. For autocross - where momentum transitions happen in fractions of a second - or for any high-RPM track use past the VTEC crossover, the difference is real and measurable. This is not a marginal gain. It is a fundamental change to how the engine feels to drive. And unlike some race-focused parts, the Streetlite is streetable every day - no chatter, no idle roughness that rules it out for daily driving.
The XACT Streetlite fits all 2000-2009 Honda S2000 models - both the AP1 (F20C, 2.0L) and AP2 (F22C1, 2.2L) - and is backed by a 1-year warranty from date of retail purchase. Install with new OEM flywheel bolts (Honda P/N 90007-PNA-000 or grade 10.9 equivalent) torqued to 76 ft-lbs.
Fits: 2000-2009 Honda S2000 AP1 and AP2 | F20C (2.0L DOHC VTEC) and F22C1 (2.2L DOHC VTEC)
-
This flywheel fits all 2000-2009 Honda S2000 models, covering both the AP1 chassis (2000-2005, F20C 2.0L DOHC VTEC) and AP2 chassis (2006-2009, F22C1 2.2L DOHC VTEC).
- 2000 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2001 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2002 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2003 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2004 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2005 Honda S2000 AP1 - F20C 2.0L DOHC VTEC
- 2006 Honda S2000 AP2 - F22C1 2.2L DOHC VTEC
- 2007 Honda S2000 AP2 - F22C1 2.2L DOHC VTEC
- 2008 Honda S2000 AP2 - F22C1 2.2L DOHC VTEC
- 2009 Honda S2000 AP2 - F22C1 2.2L DOHC VTEC
Compatible with the stock clutch bellhousing on both AP1 and AP2 chassis. No modifications required for fitment.
Installation notes: Torque flywheel bolts to 76 ft-lbs. Always install with new OEM Honda flywheel bolts (Honda P/N 90007-PNA-000 or equivalent grade 10.9 hardware) - reuse of old flywheel bolts is not recommended. A clutch alignment tool is required if you are replacing the clutch at the same time; it is not included with this flywheel. Flywheel bolts are not included.
If you are upgrading the full drivetrain at the same time, pair this flywheel with a compatible ACT clutch kit for the AP1 or AP2 S2000 for a matched friction surface and pressure plate.
-
Part Number 600355 Brand ACT (Advanced Clutch Technology) Flywheel Series XACT Streetlite Flywheel Weight 11.2 lbs (5.1 kg) OEM Flywheel Weight (Approx.) ~20 lbs (~9.1 kg) Weight Reduction vs. OEM ~8.8 lbs (~4.0 kg) Material Forged Chromoly Steel Manufacturing Process Forged, CNC Machined, Dynamically Computer Balanced Construction Type One-Piece (no inserts) Ring Gear Tooth Count 109 Ring Gear Treatment Induction Hardened SFI Certification SFI 1.1 Intended Use Street and Drag Racing Vehicle Fitment 2000-2009 Honda S2000 (AP1 and AP2) Compatible Engines F20C (2.0L DOHC VTEC), F22C1 (2.2L DOHC VTEC) Flywheel Bolt Torque Spec 76 ft-lbs Required Hardware New OEM flywheel bolts (Honda P/N 90007-PNA-000 or grade 10.9 equivalent) - not included Warranty 1 Year from Retail Purchase Date -
- 1x ACT XACT Streetlite Flywheel (Part #600355)
Not included: Flywheel bolts. Always install with new OEM Honda flywheel bolts (Honda P/N 90007-PNA-000 or equivalent grade 10.9 hardware). Reuse of old flywheel bolts is not recommended. A clutch alignment tool is required if replacing the clutch simultaneously and is not included with this flywheel.
For a complete S2000 drivetrain upgrade, pair this flywheel with a compatible ACT clutch kit for the AP1 or AP2 S2000. Using a matched ACT pressure plate and friction disc with the Streetlite flywheel ensures optimal friction surface compatibility and consistent clamping force.
- Ensure the vehicle is securely lifted and the transmission is removed. Replace the old flywheel with the ACT XACT Streetlite Flywheel, ensuring proper alignment. Reassemble the transmission and lower the vehicle. Follow the manufacturer's torque specifications for all bolts.




